苹果windows启动驱动

苹果键盘快捷键驱动

Most optical disc drives require you to press a button on the front of the drive to open it. This button can be hard to find or get to on some machines. However, you can use a keyboard shortcut to open your optical drive.

大多数光盘驱动器要求您按驱动器正面的按钮将其打开。 在某些计算机上很难找到或使用此按钮。 但是，您可以使用键盘快捷键打开光盘驱动器。

There’s a free utility, called Door Control, that allows you to easily open your optical drive using an icon in the system tray or a keyboard shortcut you specify. If your PC is in a place where the optical drive is hard to see, or your optical drive’s button is broken, try out Door Control.

有一个免费的实用程序，称为“门禁控制”，可让您使用系统任务栏中的图标或指定的键盘快捷键轻松打开光盘​​驱动器。 如果您的PC放在很难看到光驱的地方，或者光驱的按钮坏了，请尝试门控。

Download Door Control (scroll down a bit on the page), double-click the .exe file, and follow the on-screen instructions to install the program. When you get to the last screen on the setup wizard, click the “Launch Door Control” check box so there is a check mark in the box and click “Finish”.

下载Door Control (向下滚动页面)，双击.exe文件，然后按照屏幕上的说明安装程序。 当您进入设置向导的最后一个屏幕时，请单击“启动门控制”复选框，以使该复选框中有一个复选标记，然后单击“完成”。

Door Control runs and an eject icon is added to the system tray. When you move your mouse over the icon, a tooltip displays showing you which drive is currently selected and that no Shortcut Key has been defined yet.

Door Control运行，并且弹出图标已添加到系统托盘。 当您将鼠标移到该图标上时，将显示一个工具提示，向您显示当前选择了哪个驱动器，并且尚未定义任何快捷键。

If you have multiple optical drives, you can select which drive you want to be able to open using Door Control. Right-click on the Door Control eject icon in the system tray, select the “Drive” option at the top of the popup menu, and then select the drive you want to open using Door Control from the submenu.

如果有多个光盘驱动器，则可以使用“门禁”选择要打开的驱动器。 右键单击系统托盘中的Door Control弹出图标，选择弹出菜单顶部的“ Drive”选项，然后从子菜单中选择要使用Door Control打开的驱动器。

NOTE: If you’ve mounted an ISO file, the letter for that drive displays in the submenu. You can “eject” a mounted ISO file, but note that if you used Virtual CloneDrive to mount it as discussed in the linked article, the ISO file may mount itself again. That’s what happened to me when I tested this. An ISO file mounted using Virtual CloneDrive (which you really only need if you’re using Windows 7) must be unmounted using Virtual CloneDrive.

注意：如果已安装ISO文件，则该驱动器的字母将显示在子菜单中。 您可以“弹出”已安装的ISO文件，但是请注意，如果按照链接文章中的说明使用Virtual CloneDrive进行安装，则ISO文件可能会再次自行安装。 这就是我测试时发生的事情。 必须使用Virtual CloneDrive卸载使用Virtual CloneDrive挂载的ISO文件(只有在使用Windows 7时才需要的文件)。

If you only have one optical drive and have no ISO files mounted, the “Drive” option is not available on the menu. If you add an external drive or mount an ISO file while Door Control is running, and you want it accessible in Door Control, you must exit the program and run it again.

如果您只有一个光盘驱动器且没有安装ISO文件，则菜单上的“驱动器”选项不可用。 如果在Door Control运行时添加了外部驱动器或挂载了ISO文件，并且希望在Door Control中可以访问它，则必须退出程序并再次运行它。

To assign a keyboard shortcut you can use to open your optical drive, access the popup menu again and select “Hot Key”.

要分配键盘快捷方式，您可以用来打开光盘驱动器，再次访问弹出菜单，然后选择“热键”。

Make sure the cursor is in the “Shortcut Key” edit box, which initially should read “None”. Press the keyboard shortcut you want to use to enter it into the edit box, and then click “OK”.

确保光标位于“快捷键”编辑框中，该编辑框最初应显示为“无”。 按下要使用的键盘快捷键，将其输入到编辑框中，然后单击“确定”。

Now, when you move your mouse over the eject icon in the system tray, the shortcut key you assigned displays.

现在，将鼠标移到系统托盘中的弹出图标上时，将显示您分配的快捷键。

If you want Door Control to start automatically every time Windows starts, select “Load Door Control at Startup” from the popup menu. When the option is on, a check mark displays next to it, as shown below.

如果希望每次Windows启动时自动启动门控制，请从弹出菜单中选择“在启动时加载门控制”。 启用该选项后，其旁边会显示一个复选标记，如下所示。

You can also change the color of the button and the eject symbol on the button. To do this, right-click on the Door Control icon and select “Set button colors” from the popup menu.

您还可以更改按钮的颜色和按钮上的弹出符号。 为此，请右键单击“门控制”图标，然后从弹出菜单中选择“设置按钮颜色”。

Colors can be selected for the “Foreground” (the eject symbol) and the “Background” on the button in its “Normal” state and “On Click”. Click “Reset” to reset the colors to the default.

可以在其“正常”状态和“单击时”为按钮的“前景”(弹出符号)和“背景”选择颜色。 单击“重置”将颜色重置为默认值。

Click on a color in the “Basic colors” section or click on a box under “Custom colors” to create your own color using the color selector on the right or the edit boxes to define a specific color. Click “OK” once you’ve chosen your color.

单击“基本颜色”部分中的颜色，或单击“自定义颜色”下的框，使用右侧的颜色选择器或编辑框定义特定颜色来创建自己的颜色。 选择颜色后，单击“确定”。

The button in the system tray dons the newly selected colors.

系统任务栏中的按钮保留新选择的颜色。

Door Control claims to be able to also close the optical drive, but that feature depends on the hardware. It probably won’t work on most laptops, but may work on desktop PCs, where pressing the button a second time closes the door. I tested Door Control on both my desktop PC and laptop and it opened and closed the optical drive on the desktop PC, but only opened the drive on the laptop.

Door Control声称还可以关闭光盘驱动器，但是该功能取决于硬件。 它可能无法在大多数笔记本电脑上使用，但可能在台式机上使用，第二次按下该按钮可将门关闭。 我在台式机和笔记本电脑上都测试了Door Control，它可以打开和关闭台式机上的光盘驱动器，但只能打开笔记本电脑上的驱动器。

翻译自: https://www.howtogeek.com/254044/how-to-open-your-optical-drive-using-a-keyboard-shortcut-in-windows/

苹果键盘快捷键驱动